fix BootstrapPackage Load Error: Visual Studio 2010

reg delete HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\AutoLoadPackages\{adfc4e66-0397-11d1-9f4e-00a0c911004f} /v {7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB} /f

reg delete HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\AutoLoadPackages\{93694fa0-0397-11d1-9f4e-00a0c911004f} /v {7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB} /f

reg delete HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\VisualStudio\10.0\Packages\{7A4E8D96-5D5B-4415-9FAB-D6DCC56F47FB} /va /f


from : http://www.theodells.org/theodells/blog/2010/07/resolving-bootstrappackage-load-error-visual-studio-2010/

windows 7 : how to restore volume icon in system tray

kristen May 15, 2009 4:22pm BST 1. Back up the Registry by creating a restore point. 2. Go to Start > Run (or Windows-key + R), type in regedit and hit OK. 3. Navigate to the key HKEY_CURRENT_USER\Software\Classes\Local Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify. 4. Delete the values IconStreams and PastIconsStream. 5. Open up the Task Manager (Ctrl + Shift + Esc), go to the Processes tab, select explorer.exe and click End Process. 6. Open the Applications tab and click New Task at the bottom-right of the window. 7. In the message box that pops up type in explorer.exe and hit OK. 8. Explorer.exe will reload, and the missing icons should now be back in the system-tray where they belong. 9. Then if the volume bar isn't there, go to taskbar properties (where the volume was gray) and simply tick the box. from : http://en.kioskea.net/forum/affich-31257-how-to-recover-lost-missing-system-tray-icon

auto logon for Windows Vista/7

Make Windows 7 or Vista Log On Automatically
If you are just running a home computer for gaming or something unimportant, you might not want to have to log in every single time you reboot your computer. There’s an easy tweak that will let you autologin.

First, we’ll need to get to the Advanced User Accounts Control Panel to get to this setting. I think there’s a registry tweak as well, but that seems like too much work.

Type in netplwiz into the start menu search box, hit enter, and you’ll see this screen:

Note: If that doesn’t work, you can type in control userpasswords2 instead.

from http://www.howtogeek.com/howto/windows-vista/make-windows-vista-log-on-automatically/

reset winsock

on DOS command prompt type "netsh winsock reset"
then restart Windows

can not run exe program on flash drive

1. Click ที่ Start > Run regedit.exe

find
HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\Safer\CodeIdentifiers\0\Paths\

delete this key
{4fdd9xx1-8d47-4806-a351-689c2264a92e}

{4fdd91a1-8d47-4806-a351-689c2264a92e}
{4fdd92a1-8d47-4806-a351-689c2264a92e}
{4fdd93a1-8d47-4806-a351-689c2264a92e}


{4fdd91b1-8d47-4806-a351-689c2264a92e}
{4fdd92b1-8d47-4806-a351-689c2264a92e}
{4fdd93b1-8d47-4806-a351-689c2264a92e}

then restart

from :www.cpe17.com, http://www.bizinews.com/listcontents/computer-fix/cannot-open-file-exe-in-flashdrive

windows media player "The specified protocol is not supported"

just regsvr32 c:\windows\system32\wmnetmgr.dll

more detail >>

reset waste ink for canon mx318

Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.